Finally time to replace my old TV after 10+ years, and my god the market is full of ad-boxes.

I’ve heard Sceptre is the brand to look for, but I googled half a dozen of the 50-inch model numbers from their website and can’t find one that anyone’s actually selling right now.

  • SanguinePar@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    18 hours ago

    This might be a dumb question, but can’t you just get any TV you like, and simply not give it internet access?

    • 4am@lemmy.zip
      link
      fedilink
      arrow-up
      17
      ·
      16 hours ago

      A lot of those TVs are found to seek out Internet access through open access points, which a lot of Internet provider’s routers now provide. You might not have one, but your neighbor might. They also listen for shitloads of key words and note them, along with what devices where present and what time they were said. The shit is absolutely insidious.

      • grue@lemmy.world
        link
        fedilink
        arrow-up
        9
        ·
        15 hours ago

        They also listen for shitloads of key words and note them, along with what devices where present and what time they were said. The shit is absolutely insidious.

        Pretty sure I read the other day about how a smart TV quit working because it had been disconnected from the internet long enough that the microphone transcripts it had been trying to phone home filled up its memory.

        • dan@upvote.au
          link
          fedilink
          arrow-up
          3
          ·
          11 hours ago

          For what it’s worth, my LG OLEDs have been disconnected from the internet for a while (a C9 since 2020 and a C2 since 2023) and I haven’t had any issues like this. There’s no public wifi networks around me either.

          • tailiat@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            4 hours ago

            I have LG, TCL and Samsung TVs that have never been connected to the internet and they have worked fine for years.

            Also I’m unaware of any mainstream TVs that autonomously connect to wireless networks.

            • baronvonj@piefed.social
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 hour ago

              Also I’m unaware of any mainstream TVs that autonomously connect to wireless networks.

              How would you know they are, though?

    • Apeman42@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      8
      ·
      18 hours ago

      It may come to that, but I’ve heard too many people bitching about their TV either constantly begging for wifi, or seeking out an open network on its own, to be comfortable with making that my first move.

      • brucethemoose@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        4 hours ago

        Our Sony TVs do no such thing. They also have a “old person mode” interface that is delightfully simple.

        If the idea still bothers you though, plug in an Ethernet cable that goes nowhere, or connect to WiFi and firewall it off. Then it can’t search for new networks.

      • DominusOfMegadeus@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        18 hours ago

        You connect it to your home network, you just shut off its outside connection at the router. I do this for my TV and all my displays, and have never had a problem.

        • andrewta@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          15 hours ago

          wait so you connect it to your normal router then go into the router and tell it that those devices have zero internet access? or do you mean that you hook it to a new router that is just for the tv?

          • twkm@programming.dev
            link
            fedilink
            arrow-up
            0
            ·
            15 hours ago

            Either. A router just for devices(1) to be totally denied Internet access is likely the cheapest way to go, but beware devices that demand talking to their mothership like the most recent Roku ones and there will be more noise impacting your real network. Routers that can allow association but not Internet access to specific devices are more expensive or require more effort (e.g., installing ddwrt).

            (1) Actually MAC addresses, which can be spoofed and some devices might periodically change to one randomly generated. The former to intentionally avoid blocks while the latter might be to enhance privacy that might also “happen” to avoid blocks.

            • dan@upvote.au
              link
              fedilink
              arrow-up
              1
              ·
              10 hours ago

              Routers that can allow association but not Internet access to specific devices are more expensive or require more effort

              Most routers should have a firewall. You’d just need to create an outbound firewall rule rather than an inbound one.

              The better routers and wifi access points let you create separate isolated VLANs, and separate wifi networks that use VLANs. That’s a nicer approach, but you definitely need higher end hardware for that.

              I’ve got four VLANs on my home network:

              • My main network, with only trusted devices on it
              • Devices that don’t need internet access
              • IoT devices that need internet access
              • Guests

              The latter three all have client isolation enabled (devices on those networks can’t see or connect to any other devices on the network) and the “non internet access one”, as the name suggests, has no internet access at all. I use these for both wired and wireless devices (I’ve got four wifi SSIDs that correspond to the four VLANs)

            • Mihies@programming.dev
              link
              fedilink
              arrow-up
              1
              ·
              12 hours ago

              Hm, if I look at Android, it might change network if it detects no network access. At least it switches from wifi to mobile.

              • twkm@programming.dev
                link
                fedilink
                arrow-up
                1
                ·
                edit-2
                11 hours ago

                If devices start using mobile capable chipsets that’s certainly a possible result. Even sticking with just WiFi we might see them looking for an open (guest?) network or a partnership with a widespread WiFi provider like CableWiFi. The latter might even be provided by your own cable box or your neighbor’s, or similar if fixed mobile starts doing the same.

    • blueworld@piefed.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      17 hours ago

      I have to say that I frigging hate the naggy slow interfaces of the new “smart” TVs. When you have to do a reset dance just to get it to boot properly (in mins), just doesn’t seem like it’s worth putting up with even if it doesn’t report home. And of course it bitches when it doesn’t have internet too. Android TV does not belong in existence, nor anyone else’s idea of smart TVs