Finally time to replace my old TV after 10+ years, and my god the market is full of ad-boxes.

I’ve heard Sceptre is the brand to look for, but I googled half a dozen of the 50-inch model numbers from their website and can’t find one that anyone’s actually selling right now.

  • twkm@programming.dev
    link
    fedilink
    arrow-up
    0
    ·
    15 hours ago

    Either. A router just for devices(1) to be totally denied Internet access is likely the cheapest way to go, but beware devices that demand talking to their mothership like the most recent Roku ones and there will be more noise impacting your real network. Routers that can allow association but not Internet access to specific devices are more expensive or require more effort (e.g., installing ddwrt).

    (1) Actually MAC addresses, which can be spoofed and some devices might periodically change to one randomly generated. The former to intentionally avoid blocks while the latter might be to enhance privacy that might also “happen” to avoid blocks.

    • dan@upvote.au
      link
      fedilink
      arrow-up
      1
      ·
      10 hours ago

      Routers that can allow association but not Internet access to specific devices are more expensive or require more effort

      Most routers should have a firewall. You’d just need to create an outbound firewall rule rather than an inbound one.

      The better routers and wifi access points let you create separate isolated VLANs, and separate wifi networks that use VLANs. That’s a nicer approach, but you definitely need higher end hardware for that.

      I’ve got four VLANs on my home network:

      • My main network, with only trusted devices on it
      • Devices that don’t need internet access
      • IoT devices that need internet access
      • Guests

      The latter three all have client isolation enabled (devices on those networks can’t see or connect to any other devices on the network) and the “non internet access one”, as the name suggests, has no internet access at all. I use these for both wired and wireless devices (I’ve got four wifi SSIDs that correspond to the four VLANs)

    • Mihies@programming.dev
      link
      fedilink
      arrow-up
      1
      ·
      12 hours ago

      Hm, if I look at Android, it might change network if it detects no network access. At least it switches from wifi to mobile.

      • twkm@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        11 hours ago

        If devices start using mobile capable chipsets that’s certainly a possible result. Even sticking with just WiFi we might see them looking for an open (guest?) network or a partnership with a widespread WiFi provider like CableWiFi. The latter might even be provided by your own cable box or your neighbor’s, or similar if fixed mobile starts doing the same.